Laser cutting machine lens cleaning operation specifications are what?

(Click 244 )

The lens used in the laser cutting machine is divided into many kinds of focusing lenses, protective lenses, etc., in the course of its work, it will inevitably be polluted, such as water pollution or dust pollution, etc., in the daily maintenance process, the cleaning operation specification of the laser cutting machine lens is one of the important links to ensure the normal operation of the equipment and improve work efficiency. The purpose of cleaning the lens is to remove the contaminants from the lens and not cause further pollution and damage to the lens. Of course, cleaning the lens is different from the lens in life, this article explains the correct cleaning method of the laser lens in the laser cutting machine.

First of all, before cleaning the lens, it is necessary to conduct a comprehensive inspection of the laser cutting machine to ensure that the equipment is stopped and disconnected from the power supply. This can avoid accidents during the cleaning process and can better protect the safety of the operator.

Secondly, do not touch the lens directly with your fingers or instruments to avoid scratching the surface of the lens. Do not touch the film when removing the lens. Wear rubber gloves and hold the edge of the lens. Because in the lens installation and cleaning process, any bit of sticky or oil stains will improve the absorption rate of the lens and reduce the service life.

In addition, the laser cutting machine lens should be placed in a dry, clean place to detect and clean. When wiping the surface of the lens, it is necessary to use cleaning tissues and cleaning cotton paper, which is softer than ordinary cloth and is not easy to produce impurities such as dandruff. At the same time, it is necessary to be careful when wiping in the specified direction to avoid excessive force causing damage.

Finally,, after using special lens cleaning droplets on a cloth and evenly applied to the entire lens surface, it is important to follow the method recommended in the instructions.
By following the complete laser cutting machine lens cleaning practice described above, you can effectively keep the equipment in good condition and maximize its function. Only by doing every detail can we ensure the stable operation of the equipment with high quality and extend its life.

Men-luck specializes in the production of medical laser cutting machine, precision 3C structural laser cutting machine, precision metal instrument laser cutting machine and other laser equipment, according to customer product needs to provide personalized configuration, intelligent production management and other services, welcome to have the need of customer consultation and understanding.