How to use laser cutting machine to drill holes in medical needle tubes

(Click 149 )

Medical syringe is a common medical device and a professional tool used to collect, transport and inject drugs. It is widely used in various injection and blood collection operations. Usually, medical needles are composed of metal needles and plastic tubes, and some are made entirely of plastic. According to the needs of different departments and surgeries, some medical needle tubes need to be drilled and require high precision. This is usually done using a laser cutter.

The drilling principle of the laser cutting machine is to use a high-energy-density laser beam to focus on the surface of a tiny workpiece, rapidly heating and evaporating the melted material to form a slot or hole.
Using a laser cutting machine for drilling has many advantages:
① Laser drilling has the characteristics of high precision. Its beam diameter can reach the micron level, and the aperture and position can be accurately controlled to avoid errors.
② Laser drilling has high processing efficiency, is easy to operate through a computer, has fast processing speed and extremely high production efficiency.
③Laser drilling has strong adaptability and can be processed on materials with different properties such as soft, hard and brittle, and is suitable for almost any material.
④ Laser drilling requires no consumables, does not cause damage to the workpiece surface in non-contact processing technology, and saves additional costs such as modeling.
⑤The laser cutting machine has a flexible combination of software and hardware functions, and can provide personalized function configurations and intelligent production management solutions, such as automatic loading and unloading, automatic visual positioning, etc., to reduce labor costs.
⑥The laser cutting machine can realize graphic drawing requirements covering a variety of changing situations through technology, and can complete drilling tasks on various non-planar surfaces such as concave and convex surfaces, bevels, and curved surfaces.
⑦The surface of the hole processed by the laser cutting machine is smooth and smooth without burrs, and the incision is smooth.

The laser cutting machine can only be put into mass production after the test machine and proofing are intact. During the needle tube production process, the raw material tube is first clamped in the rotating shaft, and the parameters of the laser cutting machine are adjusted before the equipment can be started. processing. The operator then observes outside the machine and cuts off the power supply first for inspection if any problems are found. There are several issues that need attention in the process of needle tube production. For example, the choice of laser communication rate must be appropriate. Too much or too little power will affect the quality of needle tube cutting and drilling. For example, the sterility of the production environment must be To meet the requirements.

men-luck is a company focusing on the research, development and production of laser cutting equipment, providing enterprises with high-quality laser equipment and systematic solutions. The application of laser cutting machines in the medical industry is not limited to this. For more information about the application and processing of laser cutting machines, the editor will continue to give you popular science explanations. For more information, please visit www.menlaser.com

Spread the love
  • Application of laser drilling machine in photovoltaic industry
    Application of laser drilling machine in photovoltaic industry 2024-03-18
    view details

    Laser drilling uses a high-energy-density laser beam to locally heat the material to a high enough temperature to evaporate, melt or vaporize it to form holes. The key to laser drilling lies in precise control of energy density, line speed and focus position to achieve precise p…

  • cutting machine manufacturers explain in detail the differences between ultraviolet, red light and green light sources?
    cutting machine manufacturers explain in detail the differences between ultraviolet, red light and green light sources? 2024-03-14
    view details

    The most commonly used light sources for laser cutting machines are mainly red light, ultraviolet light, and green light. Each type of light source has different advantages. According to the characteristics, thickness and processing quality requirements of the processing materia…

  • Application and processing advantages of laser cutting machine in metal speaker mesh
    Application and processing advantages of laser cutting machine in metal speaker mesh 2024-03-11
    view details

    Metal speaker mesh is mainly used in sound-producing components of electronic equipment such as automobiles, mobile phones, and stereos. It is made of metal and has the characteristics of durability, good air permeability, etc. In the process of forming the metal speaker mesh, a…

  • Advantages of UV laser cutting machine for PCB processing
    Advantages of UV laser cutting machine for PCB processing 2024-03-07
    view details

    Ultraviolet laser is a laser that generates ultraviolet beam. Since the wavelength is 355nm, ultraviolet laser is more easily absorbed by most materials, and the absorbed high-energy ultraviolet beam will directly destroy the molecular bonds of the material, thereby achieving co…