1. Whether the laser resonator changes; Fine tune the resonator lens. Make the output light spot best;
2. The acoustooptic crystal is offset or the output energy of acoustooptic power supply is low; Adjust the position of acoustooptic crystal or increase the working current of acoustooptic power supply;
3. The laser entering the galvanometer deviates from the center: adjust the laser;
4. If the current is adjusted to about 20a and the sensitivity is still not strong enough: the krypton lamp is aging, replace it with a new lamp.
WhatsApp:
Wechat
India’s first laser cutting machine customer inquiry is here 2023-06-09
At 7:10 p.m. on July 15, 2022 (Beijing time), the company mailbox received an inquiry email from an Indian customer. The customer wanted our precision laser cutting machine equipment information, quotation and delivery time. [caption id="attachment_1595" align="aligncenter" w…
What are the advantages of closed precision laser cutting machine equipment? 2023-06-06
Most of the traditional large laser cutting machines are open, and some simple laser cutting machines are also open, but our precision laser cutting machine equipment is fully enclosed, so why? Everyone knows that the precision laser cutting machine uses a high-power-density las…
Summary of common perforation problems of small laser cutting machines 2023-05-30
In the general thermal cutting technology, only a few cases cut directly from the edge, and most of them are perforated on the board first. For example, the early laser stamping compound machine used punches to punch holes first, and then laser cutting, but how to punch holes fo…
What are the components of the laser cutting head of laser cutting equipment 2023-05-26
Laser cutting equipment is generally composed of lasers, computer software and hardware, numerical control cabinets, worktables, rotating shafts, linear motors, cutting heads and other components. Each component is an indispensable part of the equipment. As an important part of …