Turn off the water cooler and the laser power.
The factory instruction of krypton lamp in the laser indicates that the service life of krypton lamp is 300 hours. However, due to different service conditions of users, the above time can not be used as the only basis for replacing krypton lamp. With the increase of service time, the luminous efficiency of krypton lamp decreases, and the laser output also weakens. In order to obtain sufficient laser output, many users increase the current of laser power supply to enhance the luminescence of krypton lamp, which accelerates the aging of krypton lamp, forms a vicious circle, and sometimes leads to lamp explosion. In order to prevent this phenomenon, we recommend the user to decide whether to replace the krypton lamp according to the following method.
When a new krypton lamp is replaced, record the laser power ammeter value during normal marking as the standard current value.
When the krypton lamp is aging gradually, increase the current output of the laser power supply, but the ammeter value shall not exceed 1.25 times the standard current value.
For example, when marking with a new krypton lamp, the current value is 20A. After using it for a period of time, if the marking still fails after increasing the current value to 22.5A, the krypton lamp should be replaced.
India’s first laser cutting machine customer inquiry is here 2023-06-09
At 7:10 p.m. on July 15, 2022 (Beijing time), the company mailbox received an inquiry email from an Indian customer. The customer wanted our precision laser cutting machine equipment information, quotation and delivery time. [caption id="attachment_1595" align="aligncenter" w…
What are the advantages of closed precision laser cutting machine equipment? 2023-06-06
Most of the traditional large laser cutting machines are open, and some simple laser cutting machines are also open, but our precision laser cutting machine equipment is fully enclosed, so why? Everyone knows that the precision laser cutting machine uses a high-power-density las…
Summary of common perforation problems of small laser cutting machines 2023-05-30
In the general thermal cutting technology, only a few cases cut directly from the edge, and most of them are perforated on the board first. For example, the early laser stamping compound machine used punches to punch holes first, and then laser cutting, but how to punch holes fo…
What are the components of the laser cutting head of laser cutting equipment 2023-05-26
Laser cutting equipment is generally composed of lasers, computer software and hardware, numerical control cabinets, worktables, rotating shafts, linear motors, cutting heads and other components. Each component is an indispensable part of the equipment. As an important part of …